Veiligheid en Beveiliging/Camera's/Binnencamera's

SmartLife Camera voor Binnen

Wi-Fi | HD 720p | Cloud Opslag (optioneel) / microSD (niet inbegrepen) | Met bewegingssensor | Nachtzicht | Wit

Kenmerken

Origineelnummer leverancier: WIFICI05CWT
EAN nummer: 5412810290048
• Smart IP Camera - reageert automatisch om elke beweging uw kamer op te nemen
• HD-resolutie - voor kristalheldere beelden
• Eenvoudig rechtstreeks te verbinden met uw Wi-Fi-netwerk - geen aparte hub vereist
• Tweeweg communicatie - om personen in de kamer te horen en ermee te praten
• Volledig ondersteund door alle andere producten in het Nedis® SmartLife-assortiment.
Deze SmartHome IP-camera van Nedis, een essentiële aanvulling op elk smarthomesysteem, verbindt u rechtstreeks met uw Wi-Fi-netwerk - geen extra hub vereist - en wordt geactiveerd door elke beweging en elk geluid in de ruimte.

Smart IP Camera
Woningautomatisering is een stuk eenvoudiger geworden. U kunt deze eenvoudig te gebruiken camera gemakkelijk verbinden met uw bestaande Wi-Fi-netwerk om ruimtes te controleren op beweging.
De camera neemt op in HD-resolutie (1280x720 pixels) en maakt compleet heldere beelden. Daarnaast is de camera 's nachts net zo krachtig: de nachtzichtmodus heeft een bereik van 5 meter.
De camera ondersteunt microSD-kaarten tot 128 GB (niet bijgeleverd) voor voldoende opslag van beelden en dankzij het flexibele, verstelbare design kunt u deze overal in de ruimte plaatsen om een hoek van 110° op te nemen dankzij de 1/4” CMOS-sensor.
Er wordt een 3M zelfklevende pad bijgeleverd om de camera te bevestigen aan de muren van uw ruimte

Over Nedis SmartLife
Ontdek een breed en steeds groeiend assortiment producten, zoals gloeilampen, schakelaars, contactdozen, sensoren en camera’s, die allemaal kunnen worden bediend met een eenvoudig te gebruiken en intuïtieve app.
Of u nu op zoek bent naar één slimme gloeilamp of camera, of uw hele huis wilt automatiseren, ontdek hoe toegankelijk smart technologie tegenwoordig is.

Verpakking

Inhoud verpakking

IP camera
USB cable
Power adapter
Adhesive pad
Quick start guide

Verpakingsmaat Cadeaubox met eurolock

Breedte Hoogte Lengte
67 mm 97 mm 140 mm

Logistieke afmetingen

Verpakt per Breedte Hoogte Lengte Gewicht
1 65 mm 95 mm 140 mm 187 g
40 330 mm 305 mm 405 mm 8200 g

Productspecificaties

Breedte 53 mm
Hoogte 112 mm
Diepte 50 mm
Gewicht 107 g
Kleur Wit
Ingebouwde microfoon Ja
Apparaat stroominput Micro-USB
Ingangsstroom 1.0 A
Stroomkabel zijde B Micro-USB
Stroomkabel zijde A USB
Materiaal Kunststof
Functionaliteit voor cloud opslag Ja
Geïntegreerde luidsprekers Ja
Maximale resolutie HD 720p
Nachtzicht 5 m
Megapixels 1 MPixel
Lens 4.0 mm
Lengte stroomkabel 2.00 m
Geschikt voor Nedis® SmartLife
Kijkhoek 110 °
Beeld Chip 1/3" CMOS
LED 1
Accessoires AC-Adapter EU-Stekker
Zelfklevende Sticker
USB-Kabel
Ingangsvoltage 5 V DC
Maximale stroomverbruik 2.5 W
Stekkertype Euro
Maximale antenne versterking 3 dBi
Maximaal zendvermogen 14 dBm
Met bewegingssensor Ja
App beschikbaar voor Android™
IOS
Zendfrequentie 2400 - 2483.5 MHz
Type stroombron Netvoeding
Type opslag microSD (niet inbegrepen)
Cloud Opslag (optioneel)
Ondersteunde draadloze technologie Wi-Fi
Bedrijfstemperatuurbereik -20 - 50 °C
Aantal producten in verpakking 1 Stuks

Ondersteuning

Veel gestelde vragen

Wij hebben voor u de volgende vragen gevonden in het Engels

In the first screen of the Smart installation, select other on the top right.
Now select QR-Code.
Follow the steps in the app.
The camera will scan the QR code on your phone to install it.

No, it only works for the camera device you have subscribed it with.

Yes, Open te live stream of the camera.
Tap on Purchase VAS.
Here you can subcribe to the cloud storage service.
There is a 30 day free trail you can try.

No, unfortunately this is not possible at the moment.
Record and save the clips in the app itself (playback menu) and it will be saved to the ALBUM folder in the app.
From here you can save it to your mobile device.

Unfortunately it's currently not possible to access it this way.
We are looking to add this functionality in the future.

When you SD-Card or Memory is full, the oldest file will be overwritten.

You can bypass this error message.

- Click on OK and go on with the installation and follow the instructions.

Because your password or SSID is more than 20 characters, the QR-code that is generated by the app get smaller and it is more difficult for the camera too scan the QR-code.
The chance of errors while scanning are higher.

If the QR-code can't be scanned, you can use the SmartConfig mode.

tap "+" -> camera -> other (top right) -> SmartConfig and follow the steps in the app.
The length of your password/SSID does not matter when using this method.

Please try the EZ mode installation

Reset the camera by holding down the reset button until you hear the sound

Open the app and tap + > camera > tap on QR code and select EZ mode > confirm it was reset > fill in the credentials of your 2.4Ghz wifi network > the installation will start: immediately walk towards your router with your phone to aid the installation

No, this device is not compatible with Google/NEST Home (HUB)
The videostream is at moment not working with Google/NEST Hub.

Use a Class 10 SD card up to 128GB.
Avoid so called "Ultra" or "Extreme"cards.
These fast cards often have compatibility issues.

An automation can be used to make a certain "event"(condition), trigger another action (Task)
A condition can be anything from motion detection, to a certain time, a certain temperature, sunrise.
Then you can make this condition turn on lights, turn on smart plugs, make a siren sound or a combination of multiple tasks.

This optional Cloud service can be added per camera.
Each individual camera will need it's own subscription.

Go to the live view of the camera
Tap on playback
Scroll through the timeline until you found the clip you want to save.
It will start playing
Press record
When you have reached the end of what you want to record, press record again and it will be saved to your mobile device.

Yes you can.
Each person needs a unique account on their mobile device.
To add them as "family members" follow these steps:
In the main screen of the app tap on the name of your home (top left)
Tap on Home management
Tap on the name of your home again.
Tap on "add family members" and fill in the account details of the person you want to add.
It will give them access to all the devices in your home as a normal member or admin (you can select this)

If you only want to share a single device in a home, go to the settings menu of the device and select "share device" -> add member.

This is probably a Wifi problem, this can be for various reasons.
1.) Wifi signal is unstable.
2.) Wifi signal is too weak.
3.) Using an access point with the same SSID and password that do not support the IEEE 802.11R standards.

Problem 1 can often be solved by restarting the router.
Problem 2 can be checked with an app Wifi analyzer with this the signal can be viewed and corrected to a better position.
Problem 3 can be checked as the access points are turned off, the Wifi signal is still good and the connection remains if the access points are a problem, a Mesh solution can then be used.
Please make sure that they support IEEE 802.11R standard.

These type of cards can have compatibility issues and we recommend you use a regualr speed Class 10 card.